PLASTI-KOTE CO INC -- 184 EPOXY PAINT -- 8010-00F022139
===================== Product Identification ===================== Product ID:184 EPOXY PAINT MSDS Date:01/31/1990 FSC:8010 NIIN:00F022139 === Responsible Party === Company Name:PLASTI-KOTE CO INC Address:1000 LAKEROAD City:MEDINA State:OH ZIP:44256 Info Phone Num:(216) 725-4511 Emergency Phone Num:(216) 725-4511 CAGE:07778 === Contractor Identification === Company Name:PLASTI-KOTE CO INC Address:1000 LAKE ROAD City:MEDINA State:OH ZIP:44256 Phone:(216) 725-4511 CAGE:07778 Company Name:TEMPO PRODUCTS CO A PLASTI-KOTE CO INC Address:1000 LAKE ROAD Box:City:MEDINA State:OH ZIP:44256 Country:US Phone:330-725-4511 CAGE:07708 ============= Composition/Information on Ingredients ============= Ingred Name:ACETONE; DIMETHYL KETONE CAS:67-64-1 RTECS #:AL3150000 Fraction by Wt: 25-30% OSHA PEL:1000PPM ACGIH TLV:750PPM/1000STEL;9293 EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:XYLENE, DIMETHYLBENZENE, XYLOL CAS:1330-20-7 RTECS #:ZE2100000 Fraction by Wt: 25-30% Other REC Limits:100 PPM OSHA PEL:100 PPM ACGIH TLV:100 PPM, SKIN EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:ISOBUTANE, 2-METHYLPROPANE CAS:75-28-5 RTECS #:TZ4300000 Fraction by Wt: 27% Other REC Limits:1000 PPM OSHA PEL:1800 MG/CUM ACGIH TLV:1000 PPM Ingred Name:NON-HAZARDOUS FOR INGREDIENTS Fraction by Wt: 15-20% Ingred Name:WEIGHT PER GALLON IN POUNDS: 7-8 RTECS #:9999999WG ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INHALATION: NASAL/RESPIRATORY IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, UNCONSCIOUSNESS, ASPHYXIATION & PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. EYE: IRRITATION/REDNESS/TEARING/BLURRED VISION. INGESTION: GASTROINTESTINAL IRRITATION/NAUSEA/VOMITING/DIARRHEA. SKIN: IRRITATION. Explanation of Carcinogenicity:NONE Effects of Overexposure:INHALATION: NASAL/RESPIRATORY IRRITATION, DIZZNESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, UNCONSCIOUSNESS, ASPHYXIAT & PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. EYE: IRRITATION/REDNESS/TEARING/BLURRED VIS ION. INGESTION: GASTROINTESTINAL IRRITATION/NAUSEA/VOMITING/DIARRHEA. SKIN: IRRITATION. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE OXYGEN. ADMINISTER ARTIFICIAL RESPIRATION IF NOT BREATHING. EYES: FLUSH W/WATER FOR 15 MINUTES KEEP EYELIDS OPEN. INGESTION: DON'T INDU CE VOMITING (ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL) KEEP PERSON WARM. SKIN: WASH W/SOAP & WATER OR HANDCLEANER. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point:0F Lower Limits:1% Extinguishing Media:ALCOHOL, FOAM, CO2 & DRY CHEMICAL Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE FOG NOZZLES. WEAR SCBA. COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP/AUTOIGNITION/EXPLOSION WHEN EXPOSED TO HEAT. Unusual Fire/Explosion Hazard:VAPORS ARE >AIR & MAY TRAVEL ALONG THE GROUND OR MAY BE MOVED BY VENTILATION TO IGNITION SOURCE & IGNITE AT LOCATIONS DISTANT FROM HANDLING POINT. ================== Accidental Release Measures ================== Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR OTHER ABSORBENT MATERIAL & TRANSFER TO A CLOSED CONTAINER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DON'T STORE IN AREA >120F, DIRECT SUN LIGHT, HEAT OR OPEN FLAMES. DON'T PUNTURE OR INCINERATE. AVOID CONTACT & BREATHING VAPORS. Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR STORAGE OF NEPA IC FLAMMABLE LIQIDS. INTENTIONAL MISUSE DELIBERATELY CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL OR FATAL. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR NIOSH/MSHA RESPIRATORY PROTECTION OR EQUIVALENT OR LEAVE THE AREA. Ventilation:SUFFICIENT MECHANICAL (GENERAL) &/OR LOCAL EXHAUST TO MAINTAIN EXPOSUREAIR Spec Gravity:(H20 = 1) <1 Evaporation Rate & Reference:SLOWER THAN ETHER Solubility in Water:SLIGHT TO MODERATE Appearance and Odor:TYPICAL SOLVENT PAINT, Percent Volatiles by Volume:85-90% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS Stability Condition to Avoid:HEAT/SPARKS/OPEN FLAME/SMOKING/ELECTRIC MOTORS/DIRECT SUNLIGHT/TEMPS >120F OR OTHER SOURCES OF INGNITION. Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO2, CO, VARIOUS HYDROCARBONS & NITROGEN COMPOUNDS. ==================== Disposal Considerations ==================== Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAYBE DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. DON'T PUNCTURE OR INCINERATE. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.